Mold Allergy

Studies indicate that mold allergy is an important cause of allergic symptoms. Molds are a form of living plant life, which are widely distributed.
Hundreds of varieties exist and some of these are common causes of allergic reactions. In temperate climates, molds are the most abundant natural particles in outdoor air. Relative humidity over 40% enhance mold growth. “Showers” of mold particles may occur on warm, windy, rain-free days. High mold concentrations in air can also occur during and after rainfall. In general, molds cannot be completely avoided, but reductions in exposure can be made.

Mold Allergy Symptoms

• Sneezing

• Runny Nose

• Nasal Congestion

• Cough and Post Nasal Drip

• Itchy Mouth, Nose and Throat

• Itchy, Watery Eyes

• Wheezing, Shortness of Breath or Chest Tightness

Mold Allergy Treatment

• Avoid excess exposure to dust from farms, overgrown fields and pastures.

• Use a dust mask when cutting grass, clearing brush, spreading mulch or raking leaves.

• Avoid excessive houseplants and keep them out of the bedroom.

• Do not store firewood indoors.

• Use dehumidifiers in damp basements and crawl spaces. Check drainage in basements and lower levels of homes on cement slabs to make sure surfaces are kept as dry as possible.

• Shower stalls, bathrooms and windowsills may require special attention using fungicides.

• Avoid using appliances that contain stagnant fluids, including cool mist vaporizers unless they are cleaned daily. If using a humidifier during winter months, keep humidity less than 40%, change water frequently and clean the reservoir daily.

• Fungicides can be used by direct application.

• Direct application Lysol (phenolated disinfectant) can be used as a spray or solution for application on surfaces where mold can grow.

• Clorox (sodium hypochlorite 5.25%) diluted 1 to 10 in water may be used as a surface disinfectant.
• Zephiran concentrate (benzalkonium chloride 12.5%) diluted 1 to 10 in water may also be used for surface application or as a spray for mold control.

• Allergy injections or drops (immunotherapy) can benefit patients with mold allergies.